GB 10408.4-2000 入侵探测器 第4部分:主动红外入侵探测器

作者:标准资料网 时间:2024-05-20 18:56:02   浏览:8754   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:入侵探测器 第4部分:主动红外入侵探测器
英文名称:Detectors for intruder alarm systems--Part 4:Active infrared intrusion detectors
中标分类: 综合 >> 社会公共安全 >> 安全防范报警系统
ICS分类: 环保、保健与安全 >> 犯罪行为防范
替代情况:GB 10408.4-1989
发布部门:国家质量技术监督局
发布日期:2000-10-17
实施日期:2001-06-01
首发日期:1989-02-22
作废日期:1900-01-01
主管部门:公安部
归口单位:全国安全防范报警系统标准化技术委员会
起草单位:公安第三研究所
出版社:中国标准出版社
出版日期:2005-03-14
页数:12页
书号:155066.1-17569
适用范围

本标准规定了入侵报警系统中主动红外入侵探测器的特殊要求和试验方法。本标准适用于室内或室外安装的主动红外入侵探测器。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 综合 社会公共安全 安全防范报警系统 环保 保健与安全 犯罪行为防范
下载地址: 点击此处下载
Product Code:SAE AMS5529
Title:Steel, Corrosion Resistant, Sheet and Strip, 17Cr - 7.1Ni - 1.1Al, Solution Heat Treated and Cold Rolled, Precipitation Hardenable, 0.0015 to 0.050 Inch (0.038 to 1.27 mm) Nominal Thickness
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion-resistant steel in the form of sheet and strip 0.0015 to 0.050 inch (0.038 to 1.27 mm) in nominal thickness.These products have been used typically for parts such as springs requiring corrosion resistance and high strength up to 600 °F (316 °C), but usage is not limited to such applications.Strength of these cold-worked products will be impaired if parts are welded during fabrication.ertain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.【英文标准名称】:ERRATUM
【原文标准名称】:勘误
【标准号】:JIST3240ERRATUM2-2007
【标准状态】:作废
【国别】:日本
【发布日期】:2007-09-12
【实施或试行日期】:
【发布单位】:日本工业标准调查会(JP-JISC)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:C36
【国际标准分类号】:
【页数】:1P;A4
【正文语种】:日语